Wikipedia / Limit of a function
Wikipedia / Limit of a function
Although the function is not defined at zero, as becomes closer and closer to zero, becomes arbitrarily close to 1. In other words, the limit of as approaches zero, equals1.
In mathematics, the limit of a function is a fundamental concept in calculus and analysis concerning the behavior of that function near a particular input which may or may not be in the domain of the function.
Formal definitions, first devised in the early 19th century, are given below. Informally, a function assigns an output to every input . We say that the function has a limit at an input , if gets closer and closer to as moves closer and closer to . More specifically, the output value can be made arbitrarily close to if the input to is taken sufficiently close to . On the other hand, if some inputs very close to are taken to outputs that stay a fixed distance apart, then we say the limit does not exist.
The notion of a limit has many applications in modern calculus. In particular, the many definitions of continuity employ the concept of limit: roughly, a function is continuous if all of its limits agree with the values of the function. The concept of limit also appears in the definition of the derivative: in the calculus of one variable, this is the limiting value of the slope of secant lines to the graph of a function.
History
Although implicit in the development of calculus of the 17th and 18th centuries, the modern idea of the limit of a function goes back to Bernard Bolzano who, in 1817, introduced the basics of the epsilon-delta technique (see (ε, δ)-definition of limit below) to define continuous functions. However, his work was not known during his lifetime. Bruce Pourciau argues that Isaac Newton, in his 1687 Principia, demonstrates a more sophisticated understanding of limits than he is generally given credit for, including being the first to present an epsilon argument.
In his 1821 book , Augustin-Louis Cauchy discussed variable quantities, infinitesimals by saying that an infinitesimal change in necessarily produces an infinitesimal change in , while Grabiner claims that he used a rigorous epsilon-delta definition in proofs. In 1861, Karl Weierstrass first introduced the epsilon-delta definition of limit in the form it is usually written today.
The modern notation of placing the arrow below the limit symbol is due to G. H. Hardy, which is introduced in his book A Course of Pure Mathematics in 1908.
Functions of a single variable
). The value of the function at is usually omitted from the approximation; for example, in many cases where limits are useful, the function has no (it is undefined there).
(ε, δ)-definition of limit
is a function defined on the real line, and there are two real numbers and . One would say: "The limit of of , as approaches , exists, and it equals ". and write, or alternatively, say " tends to as tends to if the following property holds: for every real , there exists a real such that for all real , implies .
because for every real , we can take , so that for all real , if , then .
A more general definition applies for functions defined on subsets of the real line. Let be a subset of be a real-valued function. Let be a point such that there exists some open interval containing It is then said that the limit of as approaches is , if:
because for every real , we can take , so that for all real , if , then . In this example, contains open intervals around the point 1 (for example, the interval (0, 2)).
Here, note that the value of the limit does not depend on being defined at , nor on the value because for every , we can take , so that for all real , if , then . Note that here is undefined.
where is the interior of , and are the isolated points of the complement of We see, specifically, this definition of limit allows a limit to exist at 1, but not at 0 or 2.
The letters and can be understood as "error" and "distance". In fact, Cauchy used as an abbreviation for "error" in some of his work, rather than either or (see Cours d'Analyse). In these terms, the error (ε) in the measurement of the value at the limit can be made as small as desired by reducing the distance (δ) to the limit point. As discussed below, this definition also works for functions in a more general context. The idea that and represent distances helps suggest these generalizations.
Existence and one-sided limits
Alternatively, may approach from above (right) or below (left), in which case the limits may be written as
or
respectively. If these limits exist at p and are equal there, then this can be referred to as the limit of at . If the one-sided limits exist at , but are unequal, then there is no limit at (i.e., the limit at does not exist). If either one-sided limit does not exist at , then the limit at also does not exist.
A formal definition is as follows. The limit of as approaches from above is if:
For every , there exists a such that whenever , we have .
The limit of as approaches from below is if:
For every , there exists a such that whenever , we have .
If the limit does not exist, then the oscillation of at is non-zero.
More general definition using limit points and subsets
Limits can also be defined by approaching from subsets of the domain.
In general: Let be a limit pointthat is, is the limit of some sequence of elements of distinct from . Then we say the limit of , as approaches from values in , is if the following holds:
Note, can be any subset of , the domain of . And the limit might depend on the selection of . This generalization includes as special cases limits on an interval, as well as left-handed limits of real-valued functions (e.g., by taking to be an open interval of the form ), and right-handed limits (e.g., by taking to be an open interval of the form ). It also extends the notion of one-sided limits to the included endpoints of (half-)closed intervals, so the square root function can have limit 0 as since for every , we may take such that for all , if , then .
This definition allows a limit to be defined at limit points of the domain , if a suitable subset which has the same limit point is chosen.
which is a subset of the limit points of .
but it wouldn't work at 0 or 2, which are limit points of .
Deleted versus non-deleted limits
The definition of limit given here does not depend on how (or whether) is defined at . Bartle refers to this as a deleted limit, because it excludes the value of at . The corresponding non-deleted limit does depend on the value of at , if is in the domain of be a real-valued function. The non-deleted limit of , as approaches , is if
The definition is the same, except that the neighborhood now includes the point , in contrast to the deleted neighborhood . This makes the definition of a non-deleted limit less general. One of the advantages of working with non-deleted limits is that they allow to state the theorem about limits of compositions without any constraints on the functions (other than the existence of their non-deleted limits).
Bartle notes that although by "limit" some authors do mean this non-deleted limit, deleted limits are the most popular.
Examples
Non-existence of one-sided limit(s)
has no limit at (the left-hand limit does not exist due to the oscillatory nature of the sine function, and the right-hand limit does not exist due to the asymptotic behaviour of the reciprocal function, see picture), but has a limit at every other -coordinate.
(a.k.a., the Dirichlet function) has no limit at any -coordinate.
Non-equality of one-sided limits
has a limit at every non-zero -coordinate (the limit equals 1 for negative and equals 2 for positive ). The limit at does not exist (the left-hand limit equals 1, whereas the right-hand limit equals 2).
Limits at only one point
both have a limit at and it equals 0.
Limits at countably many points
has a limit at any where is any integer.
Limits involving infinity
Limits at infinity
The limit of as approaches infinity is , denoted
means that:
Similarly, the limit of as approaches minus infinity is , denoted
means that:
because for every , we can take such that for all real , if , then .
because for every , we can take such that for all real , if , then .
Infinite limits
For a function whose values grow without bound, the function diverges and the usual limit does not exist. However, in this case one may introduce limits with infinite values.
The statement the limit of as approaches is infinity, denoted
means that:
The statement the limit of as approaches is minus infinity, denoted
means that:
because for every such that for all real , if , then .
These ideas can be used together to produce definitions for different combinations, such as
because for every , we can take such that for all real , if , then .
Limits involving infinity are connected with the concept of asymptotes.
These notions of a limit attempt to provide a metric space interpretation to limits at infinity. In fact, they are consistent with the topological space definition of limit if
a neighborhood of −∞ is defined to contain an interval for some
a neighborhood of ∞ is defined to contain an interval where and
a neighborhood of is defined in the normal way metric space
In this case, is subject to the topological definition of a limit. Note that with this topological definition, it is easy to define infinite limits at finite points, which have not been defined above in the metric sense.
Alternative notation
Many authors allow for the projectively extended real line to be used as a way to include infinite values as well as extended real line. With this notation, the extended real line is given as and the projectively extended real line is The advantage is that one only needs three definitions for limits (left, right, and central) to cover all the cases. As presented above, for a completely rigorous account, we would need to consider 15 separate cases for each combination of infinities (five directions: −, left, central, right, and +; three bounds: −, finite, or + does not possess a central limit (which is normal):
In contrast, when working with the projective real line, infinities (much like 0) are unsigned, so, the central limit does exist in that context:
In fact there are a plethora of conflicting formal systems in use. In certain applications of numerical differentiation and integration, it is, for example, convenient to have signed zeroes to be considered true. Such zeroes can be seen as an approximation to infinitesimals.
Limits at infinity for rational functions
There are three basic rules for evaluating limits at infinity for a rational function (where and are polynomials):
If the degree of is greater than the degree of , then the limit is positive or negative infinity depending on the signs of the leading coefficients;
If the degree of and are equal, the limit is the leading coefficient of divided by the leading coefficient of ;
If the degree of is less than the degree of , the limit is 0.
If the limit at infinity exists, it represents a horizontal asymptote at . Polynomials do not have horizontal asymptotes; such asymptotes may however occur with rational functions.
Functions of more than one variable
Ordinary limits
By noting that represents a distance we defined the limit as follows: the limit of as approaches is , written
if the following condition holds:
For every , there exists a such that for all in and in we have ,
is the Euclidean distance between and . (This can in fact be replaced by any norm , and be extended to any number of variables.)
because for every such that for all real and real then .
Similar to the case in single variable, the value of at does not matter in this definition of limit.
For such a multivariable limit to exist, this definition requires the value of approaches along every possible path approaching . satisfies this condition. This can be seen by considering the polar coordinates Here is a function of r which controls the shape of the path along which is approaching . Since is bounded between [−1, 1], by the sandwich theorem, this limit tends to 0.
does not have a limit at . Taking the path while taking the path
Since the two values do not agree, does not tend to a single value as approaches .
Multiple limits
Although less commonly used, there is another type of limit for a multivariable function, known as the multiple limit. For a two-variable function, this is the double limit. we say the double limit of as approaches and approaches is , written
if the following condition holds:
For such a double limit to exist, this definition requires the value of approaches along every possible path approaching , excluding the two lines and . As a result, the multiple limit is a weaker notion than the ordinary limit: if the ordinary limit exists and equals , then the multiple limit exists and also equals does not exist.
If the domain of then the two definitions of limits coincide.
Multiple limits at infinity
we say the double limit of as and approaches infinity is
if the following condition holds:
We say the double limit of as and approaches minus infinity is
if the following condition holds:
Pointwise limits and uniform limits
Instead of taking limit as , we may consider taking the limit of just one variable, say, , to obtain a single-variable function of In fact, this limiting process can be done in two distinct ways. The first one is called pointwise limit. We say the pointwise limit of as approaches is
Alternatively, we may say tends to pointwise as approaches
This limit exists if the following holds:
Here, is a function of both and . Each is chosen for a specific point of . Hence we say the limit is pointwise in because for every fixed , the limit is clearly 0. This argument fails if is not fixed: if is very close to , the value of the fraction may deviate from 0.
This leads to another definition of limit, namely the uniform limit. We say the uniform limit of on as approaches is
Alternatively, we may say tends to uniformly on as approaches
This limit exists if the following holds:
Here, is a function of only but not . In other words, δ is uniformly applicable to all in . Hence we say the limit is uniform in because for all real , is bounded between . Hence no matter how behaves, we may use the sandwich theorem to show that the limit is 0.
Iterated limits
We may consider taking the limit of just one variable, say, , to obtain a single-variable function of and then take limit in the other variable, namely , to get a number
This limit is known as iterated limit of the multivariable function. The order of taking limits may affect the result, i.e.,
in general.
A sufficient condition of equality is given by the Moore–Osgood theorem to be uniform on .
Functions on metric spaces
Suppose and are subsets of metric spaces and , respectively, and is defined between and , with , a limit point of and . It is said that the limit of as approaches is and write
if the following property holds:
Again, note that need not be in the domain of , nor does need to be in the range of , and even if is defined it need not be equal to .
Euclidean metric
The limit in Euclidean space is a direct generalization of limits to vector-valued functions Then, under the usual Euclidean metric if the following holds:
In this example, the function concerned are finite-dimension vector-valued function. In this case, the limit theorem for vector-valued function states that if the limit of each component exists, then the limit of a vector-valued function equals the vector with each component taken the limit:
Manhattan metric
Then, under the Manhattan metric if the following holds:
Since this is also a finite-dimension vector-valued function, the limit theorem stated above also applies.
Uniform metric
Finally, we will discuss the limit in function space, which has infinite dimensions. Consider a function We want to find out as approaches , how will tend to another function The "closeness" in this function space may be measured under the uniform metric. Then, we will say the uniform limit of on as approaches is
if the following holds:
In fact, one can see that this definition is equivalent to that of the uniform limit of a multivariable function introduced in the previous section.
Functions on topological spaces
are topological spaces a Hausdorff space be a limit point, it is said that the , written
if the following property holds:
for every open neighborhood.
This last part of the definition can also be phrased as "there exists an open punctured neighbourhood.
exists and is equal to if, for all subsets of to exists and is equal to . Sometimes this criterion is used to establish the non-existence of the two-sided limit of a function on by showing that the one-sided limits either fail to exist or do not agree. Such a view is fundamental in the field of general topology, where limits and continuity at a point are defined in terms of special families of subsets, called filters, or generalized sequences known as nets.
be a general topological space, but then the limit of a function may not be unique. In particular, one can no longer talk about the limit of a function at a point, but rather a limit or the set of limits at a point.
of and in its domain if and only if is the (or, in the general case, a.
There is another type of limit of a function, namely the sequential limit be a mapping from a topological space into a Hausdorff space a limit point of and is if
If , then it is a sequential limit as well; however, the converse need not hold in general. If in addition is metrizable, then .
Other characterizations
In terms of sequences
For functions on the real line, one way to define the limit of a function is in terms of the limit of sequences. (This definition is usually attributed to Eduard Heine if, and only if, for all sequences (with, for all , not equal to ) converging to the sequence converges to . It was shown by Sierpiński in 1916 that proving the equivalence of this definition and the definition above, requires and is equivalent to a weak form of the axiom of choice. Note that defining what it means for a sequence to converge to requires the epsilon, delta method.
Similarly as it was the case of Weierstrass's definition, a more general Heine definition applies to functions defined on subsets of the real line. Let be a real-valued function with the domain . Let be the limit of a sequence of elements of Then the limit (in this sense) of is as approaches if for every sequence (so that for all , is not equal to ) that converges to , the sequence converges to . This is the same as the definition of a sequential limit in the preceding section obtained by regarding the subset of as a metric space with the induced metric.
In non-standard calculus
is infinitesimal whenever are the hyperreal numbers and is the natural extension of to the non-standard real numbers. Keisler proved that such a hyperreal definition of limit reduces the quantifier complexity by two quantifiers. On the other hand, Hrbacek writes that for the definitions to be valid for all hyperreal numbers they must implicitly be grounded in the ε-δ method, and claims that, from the pedagogical point of view, the hope that non-standard calculus could be done without ε-δ methods cannot be realized in full. Bŀaszczyk et al. detail the usefulness of microcontinuity in developing a transparent definition of uniform continuity, and characterize Hrbacek's criticism as a "dubious lament".
In terms of nearness
At the 1908 international congress of mathematics F. Riesz introduced an alternate way defining limits and continuity in concept called "nearness". A point if for every there is a point so that is near whenever is near . Here This definition can also be extended to metric and topological spaces.
Relationship to continuity
The notion of the limit of a function is very closely related to the concept of continuity. A function is said to be continuous at if it is both defined at and its value at equals the limit of as approaches :
We have here assumed that is a limit point of the domain of .
Properties
If a function is real-valued, then the limit of at is if and only if both the right-handed limit and left-handed limit of at exist and are equal to .
The function is continuous at if and only if the limit of as approaches exists and is equal to . If is a function between metric spaces and , then it is equivalent that transforms every sequence in which converges towards into a sequence in which converges towards .
If is a normed vector space, then the limit operation is linear in the following sense: if the limit of as approaches is and the limit of as approaches is , then the limit of as approaches is . If is a scalar from the base field, then the limit of as approaches is .
If and are real-valued (or complex-valued) functions, then taking the limit of an operation on and (e.g., , , , , ) under certain conditions is compatible with the operation of limits of and . This fact is often called the algebraic limit theorem. The main condition needed to apply the following rules is that the limits on the right-hand sides of the equations exist (in other words, these limits are finite values including 0). Additionally, the identity for division requires that the denominator on the right-hand side is non-zero (division by 0 is not defined), and the identity for exponentiation requires that the base is positive, or zero while the exponent is positive (finite).
These rules are also valid for one-sided limits, including when is ∞ or −∞. In each rule above, when one of the limits on the right is ∞ or −∞, the limit on the left may sometimes still be determined by the following rules.
(see also Extended real number line).
In other cases the limit on the left may still exist, although the right-hand side, called an indeterminate form, does not allow one to determine the result. This depends on the functions and . These indeterminate forms are:
See further L'Hôpital's rule below and Indeterminate form.
Limits of compositions of functions
it does not However, this "chain rule" does hold if one of the following additional conditions holds:
(that is, is continuous at ), or
does not take the value near (that is, there exists a such that if then ).
As an example of this phenomenon, consider the following function that violates both additional restrictions:
Since the value at is a removable discontinuity for all . Thus, the naïve chain rule would suggest that the limit of for all .
Limits of special interest
Rational functions
For
This can be proven by dividing both the numerator and denominator by . If the numerator is a polynomial of higher degree, the limit does not exist. If the denominator is of higher degree, the limit is 0.
Trigonometric functions
Exponential functions
Logarithmic functions
L'Hôpital's rule
This rule uses derivatives to find limits of indeterminate forms or , and only applies to such cases. Other indeterminate forms may be manipulated into this form. Given two functions and , defined over an open interval containing the desired limit point , then if:
and
and
and
exists,
Normally, the first condition is the most important one.
Summations and integrals
Specifying an infinite bound on a summation or integral is a common shorthand for specifying a limit.
An important example of limits of sums such as these are series.
See also
Notes
References
.
External links
Visual Calculus by Lawrence S. Husch, University of Tennessee (2001)