↑ arvau

Wikipedia / NORBIT

In electronics, the NORBIT family of modules is a very early form (since 1960) of digital logic developed by Philips (and also provided through and Mullard) that uses modules containing discrete components to build logic function blocks in resistor–transistor logic (RTL) or diode–transistor logic (DTL) technology.

Overview

The system was originally conceived as building blocks for solid-state hard-wired programmed logic controllers (the predecessors of programmable logic controllers (PLC)) to replace electro-mechanical relay logic in industrial control systems for process control and automation applications, similar to early Telefunken/AEG Logistat, Siemens Simatic, Brown, Boveri & Cie, ACEC Logacec or Estacord systems.

Each available logical function was recognizable by the color of its plastic container, black, blue, red, green, violet, etc. The most important circuit block contained a NOR gate (hence the name), but there were also blocks containing drivers, and a timer circuit similar to the later 555 timer IC.

The original Norbit modules of the YL6000 series introduced in 1960 had potted single in-line packages with up to ten long flying leads arranged in two groups of up to five leads in a row. These modules were specified for frequencies of less than 1kHz at ±24V supply.

Also available in 1960 were so called Combi-Element modules in single-in line packages with ten evenly spaced stiff leads in a row (5.08mm / 0.2-inch pitch) for mounting on a PCB. They were grouped in the 1-series (aka "100kHz series") with ±6V supply. The newer 10-series and 20-series had similarly sized packages, but came with an additional parallel row of nine staggered leads for a total of 19 leads. The 10-series uses germanium alloy transistors, whereas in the 20-series silicon planar transistors are used for a higher cut-off frequency of up to 1MHz (vs. 30kHz) and a higher allowed temperature range of +85°C (vs. +55°C).

In 1967, the Philips/Mullard NORBIT2 aka Valvo NORBIT-S family of modules was introduced, first consisting of the 60-series for frequencies up to 10kHz at a single supply voltage of 24V, only. Later, the 61-series, containing thyristor trigger and control modules, was added. A 90-series became available in the mid-1970s as well. There were three basic types contained in a large (one by two inch-sized) 17 pins dual in-line package, with nine pins spaced 5.08mm (0.2-inch) on one side and eight staggered pins on the other side.

Modules

Original Norbit family

  1. YL6000 series:

  2. YL6000 - NOR gate (red) ("NOR")

  3. YL6001 - Emitter follower (yellow) ("EF")

  4. YL6004 - High power output (Double-sized module) ("HP")

  5. YL6005, YL6005/00 - Counter unit (triple binary) ("3C") (violet)

  6. YL6005/05 - Single divide by 2 counter (violet) ("1C")

  7. YL6006 - Timer (brown) ("TU")

  8. YL6007 - Chassis ("CU")

  9. YL6008 - Medium power output (orange) ("MP")

  10. YL6009 - Low power output (white) ("LP")

  11. YL6010 - Photo-electric detector head ("PD")

  12. YL6011 - Photo-electric lamp head ("PL")

  13. YL6012 - Twin 2-input NOR gate (black) ("2.2 NOR")

  14. YL6100 series:

  15. YL6101 - Rectifier unit, 3…39V 1A

  16. YL6102 - Rectifier unit, 3…39V 5A

  17. YL6103/00 - Regulator unit, 6…30V 250mA

  18. YL6103/01 - Regulator unit, 1…6V 250mA

  19. YL6104 - Longitudinal link for regulator unit

  20. YL6105 - Regulator unit, 6V 150mA

  21. 88930 Relay series:

Used to control relays using variable-length pulse sequences (as with telephone pulse dialing).

  • 88930/30 - Input/Output unitFilters an input pulse string and can drive two command circuits and two relay unitsContains 1×/48, 2×/51, and 2×/57.

  • 88930/33 - Primary pulse counting unit (dual command)Can trigger two different signals via two different pulse sequences. The number of pulses that will trigger each command is configurable.

  • 88930/36 - Dual command unitAdds two additional commands to the /33.

  • 88930/37 - Quad command unitAdds four additional commands to the /33.

  • 88930/39 - Output unitCan drive two command circuits (in /36 or /37 command units) plus two /60 relay units.Contains 2×/51 and 2×/57.

  • 88930/42 - Empty unitFor adding custom circuitry. Comprises an empty housing, connector, and blank circuit board.

  • 88930/48 - Pulse shaper unit for /33 (no housing)

  • 88930/51 - Command preparation unit (no housing)For providing input to command units.

  • 88930/54 - Reset unit

  • 88930/57 - Relay amplifier unit (no housing)For driving a low-impedance relay such as the /60 relay block unit.

  • 88930/60 - Relay block unitDouble-pole, double throw 250V 2A relay. Accepts a /57 relay amplifier unit.

  • 88930/64 - Power supply unitProvides 280V 45mA, 150V 2mA, 24V 750mA, and 15V 120mA.

Combi-Element family

  1. 1-series / B890000 series :

  2. B893000, B164903 - Twin 3-input AND gates (orange) ("2.3A1", "2x3N1")

  3. B893001, B164904 - Twin 2-input AND gates (orange) ("2.2A1", "2x2N1")

  4. B893002, 2P72729 - Twin 3-input OR gates (orange) ("2.3O1", "23O1", "2x3P1")

  5. B893003, 2P72730 - Twin 2-input OR gates (orange) ("2.2O1", "22O1", "2x2P1")

  6. B894002, B164910 - Twin inverter amplifier (yellow) ("2IA1", "2.IA1", "2xIA1")

  7. B894005, 2P72728 - Twin inverter amplifier (yellow) ("2IA2", "2xIA2")

  8. B894001, B164909 - Twin emitter follower (yellow) ("2EF1", 2xEF1")

  9. B894003, 2P72727 - Twin emitter follower (yellow) ("2EF2", "2xEF2")

  10. B894000, B164907 - Emitter follower/inverter amplifier (yellow) ("EF1/IA1")

  11. B895000, B164901 - Pulse shaper (Schmitt trigger + amplifier) (green) ("PS1")

  12. B895001, B164908 - One-shot multivibrator ("OS1")

  13. B895003 - One-shot multivibrator ("OS2")

  14. B892000, B164902 - Flip-flop (red) ("FF1")

  15. B892001, 2P72707 - Shift-register Flip-flop (red) ("FF2")

  16. B892002 - Flip-flop (red) ("FF3")

  17. B892003 - Flip-flop (red) ("FF4")

  18. B893004, 2P72726 - Pulse logic (orange) ("PL1", "2xPL1")

  19. B893007 - Pulse logic (orange) ("2xPL2")

  20. B885000, B164911 - Decade counter ("DC1")

  21. B890000 - Power amplifier ("PA1")

  22. B896000 - Twin selector switch for core memories ("2SS1")

  23. B893005 - Selection gate for core memories ("SG1")

  24. 2P72732 - Pulse generator for core memories ("PG1")

  25. 2P72731 - Read amplifier for core memories ("RA1")

  26. 10-series:

  27. 2P73701 - Flip-flop ("FF10")

  28. 2P73702 - Flip-flop ("FF11")

  29. 2P73703 - Flip-flop / Bistable multivibrator with built-in trigger gates and set-reset inputs (black) ("FF12")

  30. Dual trigger gate ("2.TG13")

  31. Dual trigger gate ("2.TG14")

  32. Quadruple trigger gate ("4.TG15")

  33. Dual positive gate inverter amplifier ("2.GI10")

  34. Dual positive gate inverter amplifier ("2.GI11")

  35. Dual positive gate inverter amplifier ("2.GI12")

  36. Gate amplifier ("GA11")

  37. One-shot multivibrator ("OS11")

  38. Timer unit ("TU10")

  39. Pulse driver ("PD11")

  40. Relay driver ("RD10")

  41. Relay driver ("RD11")

  42. Power amplifier ("PA10")

  43. Pulse shaper ("PS10")

  44. Numerical indicator tube driver ("ID10")

  45. 20-series:

  46. 2P73710 - ("2.GI12", "2GI12")

Norbit 2 / Norbit-S family

  1. 60-series:

  2. 2NOR60, 2.NOR60 - Twin NOR (black)

  3. 4NOR60, 4.NOR60 - Quadruple NOR (black)

  4. 2.IA60, 2IA60 - Twin inverter amplifier for low power output (blue)

  5. LPA60 - Twin low power output

  6. 2.LPA60, 2LPA60 - Twin low power output (blue)

  7. PA60 - Medium power output (blue)

  8. HPA60 - High power output (black)

  9. 2.SF60, 2SF60 - Twin input switch filter (green)

  10. TU60 - Timer (red)

  11. FF60 - Flip-flop

  12. GLD60 - Grounded load driver (black)

  13. 61-series:

  14. TT61 - Trigger transformer

  15. UPA61 - Universal power amplifier

  16. RSA61 - Rectifier and synchroniser

  17. DOA61 - Differential operational amplifier

  18. 2NOR61, 2.NOR61 - Twin NOR

  19. 90-series:

  20. PS90 - Pulse shaper (green)

  21. FF90 - Flip-flop (red)

  22. 2TG90, 2.TG90 - Twin trigger gate (red)

  23. Accessories:

  24. PSU61 - Power supply

  25. PCB60 - Printed wiring board

  26. MC60 - Mounting chassis

  27. UMC60 - Universal mounting chassis

  28. MB60 - Mounting bar

See also

Notes

References

Further reading