Wikipedia / Spherical coordinate system
Wikipedia / Spherical coordinate system
In mathematics, a spherical coordinate system specifies a given point in three-dimensional space by using a distance and two angles as its three coordinates. These are
the radial distance, , along the line connecting the point to a fixed point called the origin;
the polar angle, , between this radial line and a given polar axis; and
the azimuthal angle, , which is the angle of rotation of the radial line around the polar axis.
(See graphic regarding the "physics convention".)
Once the radius is fixed, the three coordinates (r, θ, φ), known as a 3-tuple, provide a coordinate system on a sphere, typically called the spherical polar coordinates. The plane passing through the origin and perpendicular to the polar axis (where the polar angle is a right angle) is called the reference plane (sometimes fundamental plane).
Terminology
The radial distance from the fixed point of origin is also called the radius, or radial line, or radial coordinate. The polar angle may be called inclination angle, zenith angle, normal angle, or the colatitude. The user may choose to replace the inclination angle by its complement, the elevation angle (or altitude angle), measured upward between the reference plane and the radial linei.e., from the reference plane upward (towards to the positive z-axis) to the radial line. The depression angle is the negative of the elevation angle. (See graphic re the "physics convention"not "mathematics convention".)
Both the use of symbols and the naming order of tuple coordinates differ among the several sources and disciplines. This article will use the ISO convention frequently encountered in physics, where the naming tuple gives the order as: radial distance, polar angle, azimuthal angle, or which switches the uses and meanings of symbols θ and φ. Other conventions may also be used, such as r for a radius from the z-axis that is not from the point of origin.
According to the conventions of geographical coordinate systems, positions are measured by latitude, longitude, and height (altitude). There are a number of celestial coordinate systems based on different fundamental planes and with different terms for the various coordinates. The spherical coordinate systems used in mathematics normally use radians rather than degrees; (note 90 degrees equals radians). And these systems of the mathematics convention may measure the azimuthal angle counterclockwise (i.e., from the south direction -axis, or 180°, towards the east direction -axis, or +90°)rather than measure clockwise (i.e., from the north direction x-axis, or 0°, towards the east direction y-axis, or +90°), as done in the horizontal coordinate system. (See graphic re "mathematics convention".)
The spherical coordinate system of the physics convention can be seen as a generalization of the polar coordinate system in three-dimensional space. It can be further extended to higher-dimensional spaces, and is then referred to as a hyperspherical coordinate system.
Definition
To define a spherical coordinate system, one must designate an origin point in space, , and two orthogonal directions: the zenith reference direction and the azimuth reference direction. These choices determine a reference plane that is typically defined as containing the point of origin and the x and yaxes, either of which may be designated as the azimuth reference direction. The reference plane is perpendicular (orthogonal) to the zenith direction, and typically is designated "horizontal" to the zenith direction's "vertical". The spherical coordinates of a point then are defined as follows:
The radius or radial distance is the Euclidean distance from the origin to .
The inclination (or polar angle) is the signed angle from the zenith reference direction to the line segment . (Elevation may be used as the polar angle instead of inclination; see below.)
The azimuth (or azimuthal angle) is the signed angle measured from the azimuth reference direction to the orthogonal projection of the radial line segment on the reference plane.
The sign of the azimuth is determined by designating the rotation that is the positive sense of turning about the zenith. This choice is arbitrary, and is part of the coordinate system definition. (If the inclination is either zero or 180 degrees (= radians), the azimuth is arbitrary. If the radius is zero, both azimuth and inclination are arbitrary.)
The elevation is the signed angle from the x-y reference plane to the radial line segment , where positive angles are designated as upward, towards the zenith reference. Elevation is 90 degrees (= radians) minus inclination. Thus, if the inclination is 60 degrees (= radians), then the elevation is 30 degrees (= radians).
In linear algebra, the vector from the origin to the point is often called the position vector of P.
Conventions
denotes radial distance, the polar angle"inclination", or as the alternative, "elevation"and the azimuthal angle. It is the common practice within the physics convention, as specified by ISO standard 80000-2:2019, and earlier in ISO 31-11 (1992).
As stated above, this article describes the ISO "physics convention"unless otherwise noted.
However, some authors (including mathematicians) use the symbol ρ (rho) for radius, or radial distance, φ for inclination (or elevation) and θ for azimuthwhile others keep the use of r for the radius; all which "provides a logical extension of the usual polar coordinates notation". As to order, some authors list the azimuth before the inclination (or the elevation) angle. Some combinations of these choices result in a left-handed conflicts with the usual notation for two-dimensional polar coordinates and three-dimensional cylindrical coordinates, where is often used for the azimuth.
Angles are typically measured in degrees (°) or in radians (rad), where 360°=2 rad. The use of degrees is most common in geography, astronomy, and engineering, where radians are commonly used in mathematics and theoretical physics. The unit for radial distance is usually determined by the context, as occurs in applications of the 'unit sphere', see applications.
When the system is used to designate physical three-space, it is customary to assign positive to azimuth angles measured in the counterclockwise sense from the reference direction on the reference planeas seen from the "zenith" side of the plane. This convention is used in particular for geographical coordinates, where the "zenith" direction is north and the positive azimuth (longitude) angles are measured eastwards from some prime meridian.Note: Easting (E), Northing (N), Upwardness (). In the case of the local azimuth angle would be measured counterclockwise from to .
Unique coordinates
for any , , and .
When necessary to define a unique set of spherical coordinates for each point, the user must restrict the range, aka interval, of each coordinate. A common choice is:
radial distance:
polar angle: , or ,
azimuth : , or .
The azimuth is sometimes restricted to the half-open interval , or radians, which is the standard convention for geographic longitude, instead of the interval .
For the polar angle , the range (interval) for inclination is , which is equivalent to elevation range (interval) . In geography, the latitude is the elevation.
Even with these restrictions, if the polar angle (inclination) is 0° or 180°elevation is −90° or +90°then the azimuth angle is arbitrary; and if is zero, both azimuth and polar angles are arbitrary. To define the coordinates as unique, the user can assert the convention that (in these cases) the arbitrary coordinates are set to zero.
Plotting
To plot any dot from its spherical coordinates , where is inclination, the user would: move units from the origin in the zenith reference direction (z-axis); then rotate by the amount of the azimuth angle () about the origin from the designated azimuth reference direction, (i.e., either the x- or y-axis, see Definition, above); and then rotate from the z-axis by the amount of the angle.
Applications
Just as the two-dimensional Cartesian coordinate system is usefulhas a wide set of applicationson a planar surface, a two-dimensional spherical coordinate system is useful on the surface of a sphere. For example, one sphere that is described in Cartesian coordinates with the equation can be described in spherical coordinates by the simple equation . (In this systemshown here in the mathematics conventionthe sphere is adapted as a unit sphere, where the radius is set to unity and then can generally be ignored, see graphic.)
This (unit sphere) simplification is also useful when dealing with objects such as rotational matrices. Spherical coordinates are also useful in analyzing systems that have some degree of symmetry about a point, including: volume integrals inside a sphere; the potential energy field surrounding a concentrated mass or charge; or global weather simulation in a planet's atmosphere.
Three dimensional modeling of loudspeaker output patterns can be used to predict their performance. A number of polar plots are required, taken at a wide selection of frequencies, as the pattern changes greatly with frequency. Polar plots help to show that many loudspeakers tend toward omnidirectionality at lower frequencies.
An important application of spherical coordinates provides for the separation of variables in two partial differential equationsthe Laplace and the Helmholtz equationsthat arise in many physical problems. The angular portions of the solutions to such equations take the form of spherical harmonics. Another application is ergonomic design, where is the arm length of a stationary person and the angles describe the direction of the arm as it reaches out. The spherical coordinate system is also commonly used in 3D game development to rotate the camera around the player's position
In geography
Instead of inclination, the geographic coordinate system uses elevation angle (or latitude), in the range (aka domain) and rotated north from the equator plane. Latitude (i.e., the angle of latitude) may be either geocentric latitude, measured (rotated) from the Earth's centerand designated variously by or geodetic latitude, measured (rotated) from the observer's local vertical, and typically designated . The polar angle (inclination), which is 90° minus the latitude and ranges from 0 to 180°, is called colatitude in geography.
The azimuth angle (or longitude) of a given position on Earth, commonly denoted by , is measured in degrees east or west from some conventional reference meridian (most commonly the IERS Reference Meridian); thus its domain (or range) is and a given reading is typically designated "East" or "West". For positions on the Earth or other solid celestial body, the reference plane is usually taken to be the plane perpendicular to the axis of rotation.
Instead of the radial distance geographers commonly use altitude above or below some local reference surface (vertical datum), which, for example, may be the mean sea level. When needed, the radial distance can be computed from the altitude by adding the radius of Earth, which is approximately .
However, modern geographical coordinate systems are quite complex, and the positions implied by these simple formulae may be inaccurate by several kilometers. The precise standard meanings of latitude, longitude and altitude are currently defined by the World Geodetic System (WGS), and take into account the flattening of the Earth at the poles (about ) and many other details.
Planetary coordinate systems use formulations analogous to the geographic coordinate system.
In astronomy
A series of astronomical coordinate systems are used to measure the elevation angle from several fundamental planes. These reference planes include: the observer's horizon, the galactic equator (defined by the rotation of the Milky Way), the celestial equator (defined by Earth's rotation), the plane of the ecliptic (defined by Earth's orbit around the Sun), and the plane of the earth terminator (normal to the instantaneous direction to the Sun).
Coordinate system conversions
As the spherical coordinate system is only one of many three-dimensional coordinate systems, there exist equations for converting coordinates between the spherical coordinate system and others.
Cartesian coordinates
The spherical coordinates of a point in the ISO convention (i.e. for physics: radius , inclination , azimuth ) can be obtained from its Cartesian coordinates by the formulae
where . The inverse tangent denoted in must be suitably defined, taking into account the correct quadrant of , as done in the equations above. See the article on atan2.
Alternatively, the conversion can be considered as two sequential rectangular to polar conversions: the first in the Cartesian plane from to , where is the projection of onto the -plane, and the second in the Cartesian -plane from to . The correct quadrants for and are implied by the correctness of the planar rectangular to polar conversions.
These formulae assume that the two systems have the same origin, that the spherical reference plane is the Cartesian plane, that is inclination from the direction, and that the azimuth angles are measured from the Cartesian axis (so that the axis has ). If θ measures elevation from the reference plane instead of inclination from the zenith the arccos above becomes an arcsin, and the and below become switched.
Conversely, the Cartesian coordinates may be retrieved from the spherical coordinates (radius , inclination , azimuth ), where , ,
Cylindrical coordinates
Cylindrical coordinates (axial radius ρ, azimuth φ, elevation z) may be converted into spherical coordinates (central radius r, inclination θ, azimuth φ), by the formulas
Conversely, the spherical coordinates may be converted into cylindrical coordinates by the formulae
These formulae assume that the two systems have the same origin and same reference plane, measure the azimuth angle in the same senses from the same axis, and that the spherical angle is inclination from the cylindrical axis.
Ellipsoidal coordinates
It is also possible to deal with ellipsoids in Cartesian coordinates by using a modified version of the spherical coordinates.
Let P be an ellipsoid specified by the level set
The modified spherical coordinates of a point in P in the ISO convention (i.e. for physics: radius , inclination , azimuth ) can be obtained from its Cartesian coordinates by the formulae
An infinitesimal volume element is given by
The square-root factor comes from the property of the determinant that allows a constant to be pulled out from a column:
Integration and differentiation in spherical coordinates
The following equations (Iyanaga 1977) assume that the colatitude is the inclination from the positive axis, as in the physics convention discussed.
The line element for an infinitesimal displacement from to are the local orthogonal unit vectors in the directions of increasing , , and , respectively, and , , and are the unit vectors in Cartesian coordinates. The linear transformation to this right-handed coordinate triplet is a rotation matrix
This gives the transformation from the Cartesian to the spherical, the other way around is given by its inverse. Note: the matrix is an orthogonal matrix, that is, its inverse is simply its transpose.
The general form of the formula to prove the differential line element, is is decomposed into individual changes corresponding to changes in the individual coordinates.
The desired coefficients are the magnitudes of these vectors:
The surface element spanning from to and to on a spherical surface at (constant) radius
Thus the differential solid angle
The surface element in a surface of polar angle
The surface element in a surface of azimuth
The volume element spanning from to , to , and to is specified by the determinant of the Jacobian matrix of partial derivatives
Thus, for example, a function can be integrated over every point in by the triple integral
The del operator in this system leads to the following expressions for the gradient and LaplacianAnd it leads to the following expressions for the divergence and curl of vector fields,
The metric tensor.
Distance and angle in spherical coordinates
In spherical coordinates, given two points with The distance between the two points can be expressed as
which by the angle difference identity for cosine is
Kinematics
In spherical coordinates, the position of a point or particle (although better written as a triple) can be written as Its velocity is then and its acceleration is
The angular momentum is mass. In the case of a constant or else , this reduces to vector calculus in polar coordinates.
The corresponding angular momentum operator
The torque is given as
The kinetic energy is given as