Wikipedia / Unbounded operator
Wikipedia / Unbounded operator
In mathematics, more specifically functional analysis and operator theory, the notion of unbounded operator provides an abstract framework for dealing with differential operators, unbounded observables in quantum mechanics, and other cases.
The term "unbounded operator" can be misleading, since
"unbounded" should sometimes be understood as "not necessarily bounded";
"operator" should be understood as "linear operator" (as in the case of "bounded operator");
the domain of the operator is a linear subspace, not necessarily the whole space;
this linear subspace is not necessarily closed; often (but not always) it is assumed to be dense;
in the special case of a bounded operator, still, the domain is usually assumed to be the whole space.
In contrast to bounded operators, unbounded operators on a given space do not form an algebra, nor even a linear space, because each one is defined on its own domain.
The term "operator" often means "bounded linear operator", but in the context of this article it means "unbounded operator", with the reservations made above.
Short history
The theory of unbounded operators developed in the late 1920s and early 1930s as part of developing a rigorous mathematical framework for quantum mechanics. The theory's development is due to John von Neumann and Marshall Stone. Von Neumann introduced using graphs to analyze unbounded operators in 1932.
Definitions and basic properties
Let be Banach spaces. An unbounded operator (or simply operator) is a linear map from a linear subspace —the domain of —to the space . Contrary to the usual convention, may not be defined on the whole space .
The graph is a linear subspace of the direct sum , defined as the set of all pairs , where runs over the domain of . An operator is said to be closed if its graph is a closed set. Explicitly, this means that for every sequence of points from the domain of such that and , it holds that belongs to the domain of and . The closedness can also be formulated in terms of the graph norm: an operator is closed if and only if its domain is a complete space with respect to the norm:
An operator is said to be densely defined if its domain is dense in . This also includes operators defined on the entire space , since the whole space is dense in itself. The denseness of the domain is necessary and sufficient for the existence of the adjoint (if and are Hilbert spaces) and the transpose; see the sections below.
If is closed, densely defined and continuous on its domain, then its domain is all of .
Example
Let denote the space of continuous functions on the unit interval, and let with the supremum norm, making it a Banach space. Define the classical differentiation operator by the usual formula:
Every differentiable function is continuous, so . We claim that is a well-defined unbounded operator, with domain .
This is a linear operator, since a linear combination of two continuously differentiable functions is also continuously differentiable, and
The operator is not bounded. For example,
satisfy
but
.
The operator is densely defined (which can be shown by the Weierstrass approximation theorem, since the set of polynomial functions on [0,1] is contained in , while also being dense in ) and closed.
The same operator can be treated as an operator for many choices of Banach space and not be bounded between any of them. At the same time, it can be bounded as an operator for other pairs of Banach spaces , and also as operator for some topological vector spaces . As an example let be an open interval and consider
where:
Adjoint
be an unbounded operator between Hilbert spaces.
of is a continuous linear functional on the domain of and after extending the linear functional to the whole space via the Hahn–Banach theorem since Riesz representation theorem is densely defined; or equivalently, if exists if and only if is densely defined.
is continuous on the domain of could be anything; it could be trivial (that is, contains only zero). is a closed hyperplane vanishes everywhere on the domain. on its domain does not imply boundedness of is defined on the whole space then is bounded on its domain and therefore can be extended by continuity to a bounded operator on the whole space. A closed densely defined operator is bounded.
as follows: if and only if is densely defined. for every in the domain of is the adjoint of .
is closed.) is closed. An operator
coincides with the orthogonal complement of the range of the adjoint. That is, von Neumann's theorem both have bounded inverses. has trivial kernel, has dense range (by the above identity.) Moreover:
(This is essentially a variant of the so-called closed range theorem.) In particular, has closed range.
does not exist. This is, however, the case if, for example, is bounded.
A densely defined, closed operator is called normal if it satisfies the following equivalent conditions:
;
the domain of for every in this domain;
for every in the domain of .
Every self-adjoint operator is normal.
Transpose
be an operator between Banach spaces. Then the transpose (or dual
is densely defined (for essentially the same reason as to adjoints, as discussed above.)
in the following way:. (For the finite-dimensional case, this corresponds to the fact that the adjoint of a matrix is its conjugate transpose.) Note that this gives the definition of adjoint in terms of a transpose.
Closed linear operators
Closed linear operators are a class of linear operators on Banach spaces. They are more general than bounded operators, and therefore not necessarily continuous, but they still retain nice enough properties that one can define the spectrum and (with certain assumptions) functional calculus for such operators. Many important linear operators which fail to be bounded turn out to be closed, such as the derivative and a large class of differential operators.
Let be two Banach spaces. A linear operator is closed if for every sequence in converging to in such that as one has and . Equivalently, is closed if its graph is closed in the direct sum .
Given a linear operator , not necessarily closed, if the closure of its graph in happens to be the graph of some operator, that operator is called the closure of , and we say that is closable. Denote the closure of by . It follows that is the restriction of to .
A core (or essential domain) of a closable operator is a subset of such that the closure of the restriction of to is .
Example
Consider the derivative operator where is the Banach space of all continuous functions on an interval . If one takes its domain to be , then is a closed operator which is not bounded. On the other hand if , then will no longer be closed, but it will be closable, with the closure being its extension defined on .
Symmetric operators and self-adjoint operators
An operator T on a Hilbert space is symmetric if and only if for each x and y in the domain of . A densely defined operator is symmetric if and only if it agrees with its adjoint T∗ restricted to the domain of T, in other words when T∗ is an extension of .
In general, if T is densely defined and symmetric, the domain of the adjoint T∗ need not equal the domain of T. If T is symmetric and the domain of T and the domain of the adjoint coincide, then we say that T is self-adjoint. Note that, when T is self-adjoint, the existence of the adjoint implies that T is densely defined and since T∗ is necessarily closed, T is closed.
A densely defined operator T is symmetric, if the subspace (defined in a previous section) is orthogonal to its image under J (where J(x,y):=(y,-x)).
Equivalently, an operator T is self-adjoint if it is densely defined, closed, symmetric, and satisfies the fourth condition: both operators , are surjective, that is, map the domain of T onto the whole space H. In other words: for every x in H there exist y and z in the domain of T such that and .
An operator T is self-adjoint, if the two subspaces ,
This approach does not cover non-densely defined closed operators. Non-densely defined symmetric operators can be defined directly or via graphs, but not via adjoint operators.
A symmetric operator is often studied via its Cayley transform.
An operator T is real for all x in the domain of T.
A densely defined closed symmetric operator T is self-adjoint if and only if T∗ is symmetric. It may happen that it is not.
A densely defined operator T is called positive (or nonnegative for all x in the domain of T. Such operator is necessarily symmetric.
The operator T∗T is self-adjoint and positive for every densely defined, closed T.
A densely defined symmetric operator on a Hilbert space is called bounded from below if is a positive operator for some real number . That is, for all in the domain of (or alternatively since is arbitrary). If both and are bounded from below then is bounded.
The spectral theorem applies to self-adjoint operators and moreover, to normal operators, but not to densely defined, closed operators in general, since in this case the spectrum can be empty.
A symmetric operator defined everywhere is closed, therefore bounded, which is the Hellinger–Toeplitz theorem.
Extension-related
By definition, an operator T is an extension of an operator S if . An equivalent direct definition: for every x in the domain of S, x belongs to the domain of T and .
Note that an everywhere defined extension exists for every operator, which is a purely algebraic fact explained at and based on the axiom of choice. If the given operator is not bounded then the extension is a discontinuous linear map. It is of little use since it cannot preserve important properties of the given operator (see below), and usually is highly non-unique.
An operator T is called closable if it satisfies the following equivalent conditions:
T has a closed extension;
the closure of the graph of T is the graph of some operator;
for every sequence (xn) of points from the domain of T such that xn → 0 and also Txn → y it holds that .
Not all operators are closable.
A closable operator T called the closure of T. The closure of the graph of T Other, non-minimal closed extensions may exist.
A densely defined operator T is closable if and only if T∗
If S is densely defined and T is an extension of S then S∗ is an extension of T∗.
Every symmetric operator is closable.
A symmetric operator is called maximal symmetric if it has no symmetric extensions, except for itself. Every self-adjoint operator is maximal symmetric. The converse is false.
An operator is called essentially self-adjoint if its closure is self-adjoint. An operator is essentially self-adjoint if and only if it has one and only one self-adjoint extension.
A symmetric operator may have more than one self-adjoint extension, and even a continuum of them.
A densely defined, symmetric operator T is essentially self-adjoint if and only if both operators , have dense range.
Let T be a densely defined operator. Denoting the relation "T is an extension of S" by S ⊂ T (a conventional abbreviation for Γ(S) ⊆ Γ(T)) one has the following.
If T is symmetric then T ⊂ T∗∗ ⊂ T∗.
If T is closed and symmetric then T = T∗∗ ⊂ T∗.
If T is self-adjoint then T = T∗∗ = T∗.
If T is essentially self-adjoint then T ⊂ T∗∗ = T∗.
Importance of self-adjoint operators
The class of self-adjoint operators is especially important in mathematical physics. Every self-adjoint operator is densely defined, closed and symmetric. The converse holds for bounded operators but fails in general. Self-adjointness is substantially more restricting than these three properties. The famous spectral theorem holds for self-adjoint operators. In combination with Stone's theorem on one-parameter unitary groups it shows that self-adjoint operators are precisely the infinitesimal generators of strongly continuous one-parameter unitary groups. Such unitary groups are especially important for describing time evolution in classical and quantum mechanics.
See also
Notes
References
Citations
Bibliography
(see Chapter 12 "General theory of unbounded operators in Hilbert spaces").
(see Chapter 5 "Unbounded operators").
(see Chapter 8 "Unbounded operators").