Ordering points to identify the clustering structure (OPTICS) is an algorithm for finding density-based clusters in spatial data. It was presented in 1999 by Mihael Ankerst, Markus M. Breunig, Hans-Peter Kriegel and Jörg Sander. Its basic idea is similar to DBSCAN, but it addresses one of DBSCAN's major weaknesses: the problem of detecting meaningful clusters in data of varying density. To do so, the points of the database are (linearly) ordered such that spatially closest points become neighbors in the ordering. Additionally, a special distance is stored for each point that represents the density that must be accepted for a cluster so that both points belong to the same cluster. This is represented as a dendrogram.

Basic idea

Like DBSCAN, OPTICS requires two parameters: , which describes the maximum distance (radius) to consider, and , describing the number of points required to form a cluster. A point is a core point if at least points are found within its (including point itself). In contrast to DBSCAN, OPTICS also considers points that are part of a more densely packed cluster, so each point is assigned a core distance that describes the distance to the th closest point:

The reachability-distance of another point from a point is either the distance between and , or the core distance of , whichever is bigger:

If and we need to assume to have and belong to the same cluster.

Both core-distance and reachability-distance are undefined if no sufficiently dense cluster (w.r.t. ) is available. Given a sufficiently large , this never happens, but then every runtime. Hence, the parameter is required to cut off the density of clusters that are no longer interesting, and to speed up the algorithm.

The parameter is, strictly speaking, not necessary. It can simply be set to the maximum possible value. When a spatial index is available, however, it does play a practical role with regards to complexity. OPTICS abstracts from DBSCAN by removing this parameter, at least to the extent of only having to give the maximum value.

Pseudocode

The basic approach of OPTICS is similar to DBSCAN, but instead of maintaining known, but so far unprocessed cluster members in a set, they are maintained in a priority queue (e.g. using an indexed heap).

function OPTICS(DB, ε, MinPts) is
    for each point p of DB do
        p.reachability-distance = UNDEFINED
    for each unprocessed point p of DB do
        N = getNeighbors(p, ε)
        mark p as processed
        output p to the ordered list
        if core-distance(p, ε, MinPts) != UNDEFINED then
            Seeds = empty priority queue
            update(N, p, Seeds, ε, MinPts)
            for each next q in Seeds do
                N' = getNeighbors(q, ε)
                mark q as processed
                output q to the ordered list
                if core-distance(q, ε, MinPts) != UNDEFINED do
                    update(N', q, Seeds, ε, MinPts)

, respectively:

function update(N, p, Seeds, ε, MinPts) is
    coredist = core-distance(p, ε, MinPts)
    for each o in N
        if o is not processed then
            new-reach-dist = max(coredist, dist(p,o))
            if o.reachability-distance == UNDEFINED then // o is not in Seeds
                o.reachability-distance = new-reach-dist
                Seeds.insert(o, new-reach-dist)
            else               // o in Seeds, check for improvement
                if new-reach-dist < o.reachability-distance then
                    o.reachability-distance = new-reach-dist
                    Seeds.move-up(o, new-reach-dist)

OPTICS hence outputs the points in a particular ordering, annotated with their smallest reachability distance (in the original algorithm, the core distance is also exported, but this is not required for further processing).

Extracting the clusters

Using a reachability-plot (a special kind of dendrogram), the hierarchical structure of the clusters can be obtained easily. It is a 2D plot, with the ordering of the points as processed by OPTICS on the x-axis and the reachability distance on the y-axis. Since points belonging to a cluster have a low reachability distance to their nearest neighbor, the clusters show up as valleys in the reachability plot. The deeper the valley, the denser the cluster.

The image above illustrates this concept. In its upper left area, a synthetic example data set is shown. The upper right part visualizes the spanning tree produced by OPTICS, and the lower part shows the reachability plot as computed by OPTICS. Colors in this plot are labels, and not computed by the algorithm; but it is well visible how the valleys in the plot correspond to the clusters in above data set. The yellow points in this image are considered noise, and no valley is found in their reachability plot. They are usually not assigned to clusters, except the omnipresent "all data" cluster in a hierarchical result.

and parameters; here a value of 0.1 may yield good results), or by different algorithms that try to detect the valleys by steepness, knee detection, or local maxima. A range of the plot beginning with a steep descent and ending with a steep ascent is considered a valley, and corresponds to a contiguous area of high density. Additional care must be taken to the last points in a valley to assign them to the inner or outer cluster, this can be achieved by considering the predecessor. Clusterings obtained this way usually are hierarchical, and cannot be achieved by a single DBSCAN run.

Complexity

Like DBSCAN, OPTICS processes each point once, and performs one \varepsilon-neighborhood query during this processing. Given a spatial index might heavily influence the cost of the algorithm, since a value too large might raise the cost of a neighborhood query to linear complexity.

should be chosen appropriately for the data set.

Extensions

OPTICS-OF is an outlier detection algorithm based on OPTICS. The main use is the extraction of outliers from an existing run of OPTICS at low cost compared to using a different outlier detection method. The better known version LOF is based on the same concepts.

DeLi-Clu, Density-Link-Clustering combines ideas from single-linkage clustering parameter and offering performance improvements over OPTICS.

HiSC is a hierarchical subspace clustering (axis-parallel) method based on OPTICS.

HiCO is a hierarchical correlation clustering algorithm based on OPTICS.

DiSH is an improvement over HiSC that can find more complex hierarchies.

FOPTICS is a faster implementation using random projections.

HDBSCAN* is based on a refinement of DBSCAN, excluding border-points from the clusters and thus following more strictly the basic definition of density-levels by Hartigan.

The OPTICS Cordillera is a descriptive Scagnostics measure of how clustered a data set is. It uses OPTICS to create a dendrogram and then aggregates the dendrogram information to a measure of clusteredness that lies between 0 (no clusteredness) and 1 (maximal clusteredness).

Availability

Java implementations of OPTICS, OPTICS-OF, DeLi-Clu, HiSC, HiCO and DiSH are available in the ELKI data mining framework (with index acceleration for several distance functions, and with automatic cluster extraction using the extraction method). Other Java implementations include the Weka extension (no support for cluster extraction).

The R package "dbscan" includes a C++ implementation of OPTICS (with both traditional dbscan-like and cluster extraction) using a k-d tree for index acceleration for Euclidean distance only.

Python implementations of OPTICS are available in the PyClustering library and in scikit-learn. HDBSCAN* is available in the hdbscan library.

References