ja:Xpra From Xpra's README:

1. Xpra is known as "screen for X" : its seamless mode allows you to run X11 programs, usually on a remote host, direct their display to your local machine, and then to disconnect from these programs and reconnect from the same or another machine(s), without losing any state. Effectively giving you remote access to individual graphical applications. It can also be used to access existing desktop sessions and start remote desktop sessions.

2. Xpra is open-source (GPLv2+) with clients available for many supported platforms and the server includes a built-in HTML5 client. Xpra is usable over a wide variety of network protocols and does its best to adapt to any network conditions.

Installation

Install the xpra package on the server and the clients.

Usage

Run application "single shot"

To run an application remotely over SSH without starting an xpra server on the host it is running on in advance, you can simply use this command on your client machine:

ssh://user@host "command"

or the old way

ssh://user@host --exit-with-children --start-child="command"

Where "command" is the command you would start on the remote hosts shell. This will start xpra remotely and shuts down the xpra server when the command exits.

If you see Public Key not accepted by remote side, .ssh/config not used correctly, try to use your normal system ssh client instead of the integrated Paramiko SSH client:

ssh://user@host --exit-with-children --start-child="command"

Run applications in a persistent xpra server on the remote host

If you want to have a persistent server on the remote machine, you can start an xpra server on the machine where you want to run the applications (we are using display number 7 here):

$ xpra start :7

Now you can start an application, e.g. firefox:

$ DISPLAY=:7 firefox

Or, if you want to start a screen session and execute the programs from there to be able to close the console:

$ DISPLAY=:7 screen
[screen starts]
$ firefox

Note that if you start screen like this you do not have to specify the display number when executing programs. They will be running on the xpra display automatically.

After running these commands, you do not see any windows yet. To actually see the applications on your display, you have to connect to the xpra server. If you are connecting to an xpra display on the same machine, start the xpra client like this:

$ xpra attach :7

Or, if you are connecting to a remote machine over ssh:

ssh://user@example.com/7

After starting the client, any programs running on the remote server display are displayed on your local screen. To detach, type ctrl-c or use the command:

ssh://user@example.com/7

Programs continue to run on the server and you can reattach again later.

You can stop the server with:

$ xpra stop :7

on the machine where the server is running, or remotely:

ssh://user@example.com/7

Run whole desktop environment

To run whole desktop (on the server side):

$ xpra start-desktop :7 --start-child=xfce4-session --exit-with-children

where:

• :7 is a number of xorg DISPLAY session

• --start-child=xfce4-session run xfce4 session as child on xpra server

• --exit-with-children mean that server will be closed after session logout (children exit)

To attach it (on the server side):

$ xpra attach :7

To attach it (on the client side):

ssh://user@example.com/7

To detach press ctrl+c on terminal or run:

$ xpra detach :7

Shadow remote desktop

To clone:

• display must be auth by this same user as ssh login to

• display must be shown on remote screen

To shadow desktop run this on the client side:

ssh://DISPLAY_user@example.com/DISPLAY_number

As xorg sandbox

Sandboxing can be achieved with firejail:

• for application sandbox (change eth0 to your interface name or to none):

  $ firejail --x11=xpra --net=eth0 firefox

• xpra attach, etc:

  $ firejail --net=eth0 xpra [...]

More

For a complete manual, see xpra(1).

Tips and tricks

Start at boot

Server

It is possible to start the xpra server at boot using a systemd unit.

Create the unit file:

[Unit]
Description=xpra display

[Service]
Type=simple
User=%i
EnvironmentFile=/etc/conf.d/xpra
ExecStart=/usr/bin/xpra --no-daemon start ${%i}

[Install]
WantedBy=multi-user.target

/etc/systemd/system/xpra@.service

Now create the configuration, adding a line for each username you want to have an xpra display:

myusername=:7

/etc/conf.d/xpra

Enable the service for each username that owns a display. In this example, the service would be xpra@myusername.service.

Client

Method 1: .xinitrc

Add to your ~/.xinitrc file the line necessary to start the connection, adding an & at the end of the line.

Make sure to add such line before the exec line.

For example, on a remote client it could be:

ssh://user@example.com/7 &

~/.xinitrc

Method 2: systemd user session

Configure your session to use systemd user session. Read Systemd/User for details.

Create the following service unit:

[Unit]
Description=xpra client

[Service]
Type=simple
EnvironmentFile=%h/.config/conf/xpra_client
ExecStart=/usr/bin/xpra attach %i $OPTS

[Install]
WantedBy=default.target

~/.config/systemd/user/xpra-client@.service

Create the configuration file, using the options you want:

OPTS=--encoding=jpeg --quality=90

~/.config/conf/xpra_client

The service name would be in the format of xpra-client@ssh:username@hostname:<display number>.service.

Example: xpra-client@ssh:myuser@example.com:7.service

Enable that service as a user unit.

Troubleshooting

Error: Only console users are allowed to run the X server

If the execution fails with this error message in the log file you need to make the following changes:

Create the following:

allowed_users=anybody

/etc/X11/Xwrapper.config

Error: failed to connect to display :100

Sometimes this errors are produced:

(EE) Fatal server error:
(EE) parse_vt_settings: Cannot open /dev/tty0 (Permission denied)
(EE) Server terminated with error (1). Closing log file.

/run/user/1000/xpra/:100.log

To solve it is necessary run with --xvfb=/usr/bin/Xorg. Example:

ssh://$USER@$SERVER/100 --start-child=/usr/bin/terminator --xvfb=/usr/bin/Xorg

See also

• Xpra website