State Route20 (SR20) is a state highway roughly in the shape of a capital J rotated ninety degrees to the left, which travels through portions of Floyd, Bartow, Cherokee, Forsyth, Gwinnett, Walton, Rockdale, Newton, and Henry counties in the northwestern and north-central parts of the U.S. state of Georgia. Its counterclockwise, or western terminus is at the Alabama state line in Floyd County, and its clockwise, or eastern terminus occurs at its interchange with Lower Woolsey Road southwest of Hampton in Henry County south-southeast of the Atlanta Motor Speedway.

Route description

From the Alabama state line, SR20 proceeds east through central Floyd County into the city of Rome, and is concurrent with US 27, SR 1, and SR 53 through downtown Rome. The highway leaves Rome to the east, concurrent with US 411, bisecting Floyd County, and then enters and bisects Bartow County, still concurrent with US411 until just north of Cartersville (US41 is briefly concurrent in Cartersville as well), after which SR20 continues eastward on its own. The highway intersects I-75 north of Cartersville, and continues to head east, passing Lake Allatoona to its north, and entering Cherokee County. SR20 heads east into central Cherokee County and through its county seat in Canton, and has a brief concurrency with I-575/SR 5, before continuing east into Forsyth County. In central Forsyth County, the highway dips southeast to pass to the south of Sawnee Mountain and heads through Cumming, crossing US 19 and SR 400, and heading on into Gwinnett County, passing to the south of Lake Lanier. SR20 then turns south after an interchange with I-985/US 23/SR 365, crossing I-85 shortly thereafter. The road also provides access to SR 316, which leads to Athens. SR20 continues southward through Lawrenceville and heads through Loganville into Walton County and paralleling the Gwinnett–Walton County line, before crossing into Rockdale County and meeting I-20/US 278/SR 12 in Conyers. Likely to help alleviate driver confusion due to two identically-numbered highways meeting, the highway is usually referred to at this point as SR 138, with which it travels concurrent through Conyers. SR20 continues south and then southwest to the Henry County seat of McDonough, where it briefly travels concurrent with SR 81. SR81 departs to the west after the highways cross I-75 at exit 218. The portion of SR20 between the western end of the SR81 concurrency and Lower Woolsey Road, the highway's clockwise/eastern terminus, was widened in the early 2000s from two lanes to four, including a new southern bypass of the city of Hampton, and more controlled access at US19/US41. The primary purpose of the widening has been to facilitate the flow of traffic to and from the Atlanta Motor Speedway located near the highway's clockwise terminus.

Traffic

The Georgia Department of Transportation average annual daily traffic (AADT) numbers for the year 2011 show a variety of daily averages across SR20. The traffic load on the highway starts at its lowest daily average load as the route starts into Floyd County, where numbers hover around 5,400 vehicles per day. These averages increase rapidly as the highway approaches Rome, going from around 12,000 vehicles to a peak of 38,000 vehicles in downtown Rome. As SR20 becomes concurrent with US27/SR1, the numbers decrease to an average of 32,000, and then decrease more rapidly to around 15,000 as SR20 heads east out of Rome. The vehicle load stays in that area all the way through Floyd County and into Bartow County, as the highway is the main west-to-east thoroughfare between Rome and Cartersville. In Cartersville, where the highway is concurrent with US41, the vehicle count reaches a zenith of just over 41,000, but then drops off sharply as the highway heads into rural Cherokee County, dipping just below 10,000 before increasing again to near 24,000 vehicles per day as it approaches I-575/SR5. On the portion of the highway that is concurrent with I-575/SR5, the highway sees its maximum vehicle load of just over 54,000 vehicles, again dropping rapidly east of I-575/SR5, going from around 24,000 down to 11,000, and further down to around 10,000 as the Forsyth County line is reached.

Numbers start to creep up again as the Forsyth county seat of Cumming approaches, going from 10,000 to over 22,000 vehicles, cresting at 37,000 vehicles south of Cumming, as the route feeds traffic onto US19/SR400 southbound into Atlanta. Averages stabilize around 20,000 vehicles per day as SR20 heads into Gwinnett County, briefly cresting again at over 41,000 vehicles around I-985, and dipping to around 30,000 vehicles around I-85. South of Lawrenceville, numbers then start to decrease once more from around 22,000 down to 14,000 around Loganville, and dip down into average of just over 8,000 in rural Walton County. Until the highway reaches Conyers, average numbers see lows of 6,800 in Rockdale County, increasing again to just over 31,000 in and around Conyers and I-20. Rapidly decreasing once more to around 7,600 vehicles per day in Newton and northern Henry counties, another high is reached in the vicinity of I-75 with just over 28,000 vehicles per day. At its clockwise terminus in Hampton average traffic loads are measured at just over 12,000 vehicles per day.

National Highway System

The following portions of SR20 are part of the National Highway System, a system of routes determined to be the most important for the nation's economy, mobility, and defense:

• From its western terminus at the Alabama state line to SR124 in Lawrenceville

• From its intersection with Sigman Road NE to its interchange with I-20 in Conyers

• From I-75 in McDonough to its eastern terminus southwest of Hampton

History

1920s

The highway that would eventually become SR20 was established at least as early as 1919 as the entire length of SR 4 from the Alabama state line to Cartersville, an unnumbered road from Cumming to Buford, part of SR13 from Buford to Lawrenceville, and part of SR 45 from Lawrenceville to Loganville. By the end of 1921, SR 68 was established on the current path of SR20 from Cumming to Buford. Also, SR45 between Lawrenceville and Loganville was redesignated as part of SR13. By the end of 1926, two segments had a "sand clay or top soil" surface: from the Alabama state line to just west of Rome and from Sugar Hill to Lawrenceville. The highway in the vicinity of Rome had a "completed hard surface". A portion of the highway from just east of Rome to a point northwest of Cartersville was under construction. In the northwestern part of Cartersville and farther to the west, a portion of the highway had a completed semi hard surface. Within three years, all of SR4 was redesignated as part of SR20, with US 41W designated on the Rome–Cartersville segment. US19 was designated on the Buford–Lawrenceville segment. The portion of the highway at the Alabama state line had a completed semi hard surface. The portion of the highway just east of Rome had a completed hard surface. The highway was under construction northwest of Cartersville.

1930s

By the middle of 1930, SR20 was established from SR61 in Rydal to SR5 in Canton. The entire Rome–Cartersville and Buford–Lawrenceville segments had a completed hard surface. Also, SR53 was designated from the Alabama state line to Rome, farther to the north than SR20. Later that year, the portion of SR20 and SR53 west of Rome were swapped. By the beginning of 1932, US19 was shifted farther to the west and off of the current SR20 between Buford and Lawrenceville; at the same time, US23 was designated on this same segment. In January 1932, SR20 was established from Canton to Cumming. SR68, from Cumming to Buford, was decommissioned and redesignated as part of SR20. Also, since SR13 was shifted to a more western alignment, its segment from Buford to Lawrenceville was also redesignated as part of SR20. A few months later, SR20 was established from Loganville to Conyers. Nearly a year later, SR20 was established from Conyers to McDonough. The next month, the western part of the segment from the Alabama state line to Rome was under construction. Later that year, SR20 was designated along SR61 from Cartersville to Rydal, with the entire length having a sand clay or top soil surface. Also, a portion of the highway east of Canton was under construction. Before the year ended, US41W between Rome and Cartersville was redesignated as part of US411, which was also designated along SR20/SR61 from Cartersville to Rydal. At this time, the Rockdale County portion of the segment between Loganville and Conyers was under construction. By the middle of 1935, the western half of the Canton–Cumming segment was under construction. By October of that year, a small portion east of Canton had a sand clay or top soil surface. At the end of the year, a small portion north-northeast of Cartersville, as well as a small portion north-northeast of Conyers, had a completed hard surface. Later in 1936, the central portion of the SR20/SR61 segment, from Cartersville to Rydal, had completed grading, but was not surfaced. A few months later, a small portion south-southwest of Rydal had a completed hard surface. The entire Forsyth County portion of the Canton–Cumming segment, except for the eastern end, was under construction. Also, the entire Gwinnett County portion of the Cumming–Buford segment had completed grading, but was not surfaced. By the middle of the year, the central portion of SR20/SR61, from Cartersville to Rydal, had a completed hard surface. Also, the eastern three-fourths of the Canton–Cumming segment was under construction. A few months later, the western third of this segment had a completed hard surface, while the eastern third of it had completed grading, but was not surfaced. The northern half of the segment between Lawrenceville and Loganville, and nearly the entire northern half of the segment between Conyers and McDonough, also had completed grading, but was not surfaced. About two years later, US23 was shifted farther to the west and off of SR20's path. Also, a small portion northeast of Buford had a sand clay or top soil surface. Before the year ended, about half of the total length of the segment from the Alabama state line and Rome had a completed hard surface.

1940s

Toward the end of 1940, the western portion of this segment, as well as the entire Rockdale County portion of the Conyers–McDonough segment, had a completed hard surface. Later that year, SR20 Spur was built in the northern portion of Cartersville from US41/US411/SR3/SR20 to US411/SR20/SR61. At this time, SR 113 was established from US411/SR20/SR61 in the northern portion of Cartersville to SR5 in the southern portion of Canton. In 1941, the western and eastern termini of SR113 had completed grading, but were not surfaced. The next year, SR113 was truncated to Cartersville, its former path was redesignated as part of SR20. With the highway being shifted southward, its former path between Rydal and Canton became part of SR140. In 1943, SR20 Spur in the northern part of Cartersville was redesignated as part of the SR20 mainline. By the end of 1946, three segments were hard surfaced: Alabama state line to Rome, Cumming to Buford, and Lawrenceville to Loganville. Between 1946 and the beginning of 1948, the Canton–Cumming segment, and a portion north-northeast of Conyers, were both hard surfaced. At this time SR 20 Spur was established in Loganville.

1950s

Before the third quarter of 1950 ended, a portion of the highway northeast of Cartersville was hard surfaced. By the end of 1951, the southern half of the segment from Loganville to Conyers, and a portion northeast of McDonough, had been hard surfaced. In 1952, an unnumbered road was built from SR81 west-southwest of McDonough to US19/US41/SR3 in Hampton. The next year, a small portion of SR20 in the northern part of Cartersville, a portion of it west of Canton, and the entire Rockdale County portion were hard surfaced. At this time, SR 294N was built, with a hard surface, northeast of Cartersville. At this time, SR20 Conn. was built, from SR20 in Sugar Hill, to US23/SR13 south of Buford. In 1954, the entire Walton County portion of the highway was hard surfaced. SR20 Conn. was redesignated as part of the SR20 mainline. In 1955, it was reverted to being designated as SR20 Conn., with the western part paved. A few years later, all portions of SR20 that had been built were paved. At this time, SR294 had been redesignated as the SR 294 mainline. By 1960, SR20 was extended west-southwest from McDonough along SR81, and then on a previously unnumbered road to US19/US41/SR3 in Hampton. The entire length of this extension was paved.

1960s

Between 1960 and 1963, US411 between Rome and Cartersville was shifted on a more southerly routing, concurrent with SR 344; SR20 remained on the old alignment. By 1966, SR294 had been reverted to being designated as SR294N. SR20 Conn. had been decommissioned and redesignated as the SR20 mainline again. In 1966, SR20 Spur was designated from SR20 in Sugar Hill to SR 13 Spur in Buford.

Later years

The highway stayed about the same until 1977, when SR344 was decommissioned. SR20 was shifted onto US411 between Rome and Cartersville. SR20's old alignment was redesignated as part of SR 293. A few years later, SR20 Spur in Loganville was decommissioned and redesignated as part of SR81. A decade later, SR20 Spur in Buford was also decommissioned. In the middle of the decade, SR294N was decommissioned again and redesignated as SR20 Spur. In the mid-2000s, SR20 was extended to Lower Woolsey Road southwest of Hampton. In 2024, the highway's concurrency with US 29 / SR 8 through Lawrenceville was removed when US29 / SR8 was realigned to bypass the city along SR 316 and Lawrenceville–Suwanee Road.

Major intersections

Cartersville spur route

State Route20 Spur (SR20 Spur) is a spur route of SR20. It travels from SR20, just east of its interchange with Interstate 75 (I-75) north of Cartersville, south to Allatoona Dam. The highway, along with nearby Allatoona Dam road, formed the two segments of State Route294.

By 1953, SR20 Spur had been constructed and was signed as SR294.

See also

References

External links