Types of radio emissions on arvau

Wikipedia / Types of radio emissions

The International Telecommunication Union uses an internationally agreed system for classifying radio frequency signals. Each type of radio emission is classified according to its bandwidth, method of modulation, nature of the modulating signal, and type of information transmitted on the carrier signal. It is based on characteristics of the signal, not on the transmitter used.

An emission designation is of the form BBBB 123 45, where BBBB is the bandwidth of the signal, 1 is a letter indicating the type of modulation used of the main carrier (not including any subcarriers which is why FM stereo is F8E and not D8E), 2 is a digit representing the type of modulating signal again of the main carrier, 3 is a letter corresponding to the type of information transmitted, 4 is a letter indicating the practical details of the transmitted information, and 5 is a letter that represents the method of multiplexing. The 4 and 5 fields are optional.

This designation system was agreed at the 1979 World Administrative Radio Conference (WARC 79), and gave rise to the Radio Regulations that came into force on 1 January 1982. A similar designation system had been in use under prior Radio Regulations.

Designation details

Bandwidth

The bandwidth (BBBB above) is expressed as four characters: three digits and one letter. The letter occupies the position normally used for a decimal point, and indicates what unit of frequency is used to express the bandwidth. The letter H indicates Hertz, K indicates kiloHertzHertz, M indicates megaHertzHertz, and G indicates gigaHertz. For instance, "500H" means 500Hz, and "2M50" means 2.5MHz. The first character must be a digit between 1 and 9 or the letter H; it may not be the digit0 or any other letter.

Type of modulation

Type of modulating signal

Types 4 and 5 were removed from use with the 1982 Radio Regulations. In previous editions, they had indicated facsimile and video, respectively.

Type of transmitted information

Details of information

Multiplexing

Common examples

There is some overlap in signal types, so a transmission might legitimately be described by two or more designators. In such cases, there is usually a preferred conventional designator.

Broadcasting

A3E or A3EG : Ordinary amplitude modulation used for low frequency and medium frequency AM broadcasting
A8E, A8E H: AM stereo broadcasting.
F8E, F8EH : FM broadcasting for radio transmissions on VHF, and as the audio component of analogue television transmissions. Since there are generally pilot tones (subcarriers) for stereo and RDS the designator '8' is used, to indicate multiple signals.
C3F, C3FN : Analogue PAL, SÉCAM, or NTSC television video signals (formerly type A5C, until 1982)
C7W : ATSC digital television, commonly on VHF or UHF
G7W : DVB-T, ISDB-T, or DTMB digital television, commonly on VHF or UHF

Two-way radio

A3E : AM speech communication used for aeronautical & amateur communications
F3E : FM speech communication often used for marine radio and many other VHF communications
20K0F3E : Wide FM, 20.0kHz width, ±5kHz deviation, still widely used for amateur radio, NOAA weather radio, marine, and aviation users and land mobile users below 50MHz
11K2F3E : Narrow FM, 11.25kHz bandwidth, ±2.5kHz deviation In the United States, all Part90 Land Mobile Radio Service (LMRS) users operating above 50MHz were required to upgrade to narrowband equipment by 1January 2013.
6K00F3E : Even narrower FM, future roadmap for Land Mobile Radio Service (LMRS), already required on 700MHz public safety band
J3E : SSB speech communication, used on HF bands by marine, aeronautical and amateur users
R3E : SSB with reduced carrier (AME) speech communication, primarily used on HF bands by the military (a.k.a. compatible sideband)

Low-speed data

N0N : Continuous, unmodulated carrier, formerly common for radio direction finding (RDF) in marine and aeronautical navigation.
A1A : Signalling by keying the carrier directly, a.k.a. continuous wave (CW) or on–off keying, currently used in amateur radio. This is often but not necessarily Morse code.
A2A : Signalling by transmitting a modulated tone with a carrier, so that it can easily be heard using an ordinary AM receiver. It was formerly widely used for station identification of non-directional beacons, usually but not exclusively Morse code (an example of a modulated continuous wave, as opposed to A1A, above).
F1B : Frequency-shift keying (FSK) telegraphy, such as RTTY.
F1C : High frequency Radiofax
F2D : Data transmission by frequency modulation of a radio frequency carrier with an audio frequency FSK subcarrier. Often called AFSK/FM.
J2B : Phase-shift keying such as PSK31 (BPSK31)

Other

P0N : Unmodulated Pulse-Doppler radar