↑ arvau

Wikipedia / Reassignment method

The method of reassignment is a technique for sharpening a time-frequency representation (e.g. spectrogram or the short-time Fourier transform) by mapping the data to time-frequency coordinates that are nearer to the true region of support of the analyzed signal. The method has been independently introduced by several parties under various names, including method of reassignment, remapping, time-frequency reassignment, and modified moving-window method. The method of reassignment sharpens blurry time-frequency data by relocating the data according to local estimates of instantaneous frequency and group delay. This mapping to reassigned time-frequency coordinates is very precise for signals that are separable in time and frequency with respect to the analysis window.

Introduction

Many signals of interest have a distribution of energy that varies in time and frequency. For example, any sound signal having a beginning or an end has an energy distribution that varies in time, and most sounds exhibit considerable variation in both time and frequency over their duration. Time-frequency representations are commonly used to analyze or characterize such signals. They map the one-dimensional time-domain signal into a two-dimensional function of time and frequency. A time-frequency representation describes the variation of spectral energy distribution over time, much as a musical score describes the variation of musical pitch over time.

In audio signal analysis, the spectrogram is the most commonly used time-frequency representation, probably because it is well understood, and immune to so-called "cross-terms" that sometimes make other time-frequency representations difficult to interpret. But the windowing operation required in spectrogram computation introduces an unsavory tradeoff between time resolution and frequency resolution, so spectrograms provide a time-frequency representation that is blurred in time, in frequency, or in both dimensions. The method of time-frequency reassignment is a technique for refocussing time-frequency data in a blurred representation like the spectrogram by mapping the data to time-frequency coordinates that are nearer to the true region of support of the analyzed signal.

The spectrogram as a time-frequency representation

One of the best-known time-frequency representations is the spectrogram, defined as the squared magnitude of the short-time Fourier transform. Though the short-time phase spectrum is known to contain important temporal information about the signal, this information is difficult to interpret, so typically, only the short-time magnitude spectrum is considered in short-time spectral analysis.

As a time-frequency representation, the spectrogram has relatively poor resolution. Time and frequency resolution are governed by the choice of analysis window and greater concentration in one domain is accompanied by greater smearing in the other.

A time-frequency representation having improved resolution, relative to the spectrogram, is the Wigner–Ville distribution, which may be interpreted as a short-time Fourier transform with a window function that is perfectly matched to the signal. The WignerVille distribution is highly concentrated in time and frequency, but it is also highly nonlinear and non-local. Consequently, this distribution is very sensitive to noise, and generates cross-components that often mask the components of interest, making it difficult to extract useful information concerning the distribution of energy in multi-component signals.

Cohen's class of bilinear time-frequency representations is a class of "smoothed" WignerVille distributions, employing a smoothing kernel that can reduce sensitivity of the distribution to noise and suppresses cross-components, at the expense of smearing the distribution in time and frequency. This smearing causes the distribution to be non-zero in regions where the true WignerVille distribution shows no energy.

The spectrogram is a member of Cohen's class. It is a smoothed WignerVille distribution with the smoothing kernel equal to the WignerVille distribution of the analysis window. The method of reassignment smooths the WignerVille distribution, but then refocuses the distribution back to the true regions of support of the signal components. The method has been shown to reduce time and frequency smearing of any member of Cohen's class. In the case of the reassigned spectrogram, the short-time phase spectrum is used to correct the nominal time and frequency coordinates of the spectral data, and map it back nearer to the true regions of support of the analyzed signal.

The method of reassignment

Pioneering work on the method of reassignment was published by Kodera, Gendrin, and de Villedary under the name of Modified Moving Window Method. Their technique enhances the resolution in time and frequency of the classical Moving Window Method (equivalent to the spectrogram) by assigning to each data point a new time-frequency coordinate that better-reflects the distribution of energy in the analyzed signal.

, defined

is a (real-valued) lowpass kernel function, like the window function in the short-time Fourier transform. The coefficients in this decomposition are defined

.

can be reconstructed from the moving window coefficients by

satisfying the phase stationarity condition

defined by

This phenomenon is known in such fields as optics as the principle of stationary phase, which states that for periodic or quasi-periodic signals, the variation of the Fourier phase spectrum not attributable to periodic oscillation is slow with respect to time in the vicinity of the frequency of oscillation, and in surrounding regions the variation is relatively rapid. Analogously, for impulsive signals, that are concentrated in time, the variation of the phase spectrum is slow with respect to frequency near the time of the impulse, and in surrounding regions the variation is relatively rapid.

In reconstruction, positive and negative contributions to the synthesized waveform cancel, due to destructive interference, in frequency regions of rapid phase variation. Only regions of slow phase variation (stationary phase) will contribute significantly to the reconstruction, and the maximum contribution (center of gravity) occurs at the point where the phase is changing most slowly with respect to time and frequency.

and are computed from the phase of the short-time Fourier transform, which is normally ignored when constructing the spectrogram. These quantities are local in the sense that they represent a windowed and filtered signal that is localized in time and frequency, and are not global properties of the signal under analysis.

at which it is computed. This point is sometimes called the center of gravity of the distribution, by way of analogy to a mass distribution. This analogy is a useful reminder that the attribution of spectral energy to the center of gravity of its distribution only makes sense when there is energy to attribute, so the method of reassignment has no meaning at points where the spectrogram is zero-valued.

Efficient computation of reassigned times and frequencies

of a time domain signal. The reassignment operations proposed by Kodera et al. cannot be applied directly to the discrete short-time Fourier transform data, because partial derivatives cannot be computed directly on data that is discrete in time and frequency, and it has been suggested that this difficulty has been the primary barrier to wider use of the method of reassignment.

It is possible to approximate the partial derivatives using finite differences. For example, the phase spectrum can be evaluated at two nearby times, and the partial derivative with respect to time be approximated as the difference between the two values divided by the time difference, as in

and provided that the phase difference is appropriately "unwrapped", this finite-difference method yields good approximations to the partial derivatives of phase, because in regions of the spectrum in which the evolution of the phase is dominated by rotation due to sinusoidal oscillation of a single, nearby component, the phase is a linear function.

Independently of Kodera et al., Nelson arrived at a similar method for improving the time-frequency precision of short-time spectral data from partial derivatives of the short-time phase spectrum. It is easily shown that Nelson's cross spectral surfaces compute an approximation of the derivatives that is equivalent to the finite differences method.

Auger and Flandrin showed that the method of reassignment, proposed in the context of the spectrogram by Kodera et al., could be extended to any member of Cohen's class of time-frequency representations by generalizing the reassignment operations to

is the Wigner is the kernel function that defines the distribution. They further described an efficient method for computing the times and frequencies for the reassigned spectrogram efficiently and accurately without explicitly computing the partial derivatives of phase.

In the case of the spectrogram, the reassignment operations can be computed by

.

. Since these algorithms operate only on short-time spectral data evaluated at a single time and frequency, and do not explicitly compute any derivatives, this gives an efficient method of computing the reassigned discrete short-time Fourier transform.

must be non-zero. This is not much of a restriction, since the reassignment operation itself implies that there is some energy to reassign, and has no meaning when the distribution is zero-valued.

Separability

The short-time Fourier transform can often be used to estimate the amplitudes and phases of the individual components in a multi-component signal, such as a quasi-harmonic musical instrument tone. Moreover, the time and frequency reassignment operations can be used to sharpen the representation by attributing the spectral energy reported by the short-time Fourier transform to the point that is the local center of gravity of the complex energy distribution.

For a signal consisting of a single component, the instantaneous frequency can be estimated from the partial derivatives of phase of any short-time Fourier transform channel that passes the component. If the signal is to be decomposed into many components,

and the instantaneous frequency of each component is defined as the derivative of its phase with respect to time, that is,

then the instantaneous frequency of each individual component can be computed from the phase of the response of a filter that passes that component, provided that no more than one component lies in the passband of the filter.

This is the property, in the frequency domain, that Nelson called separability and is required of all signals so analyzed. If this property is not met, then the desired multi-component decomposition cannot be achieved, because the parameters of individual components cannot be estimated from the short-time Fourier transform. In such cases, a different analysis window must be chosen so that the separability criterion is satisfied.

That is,

In general, there is an infinite number of equally valid decompositions for a multi-component signal. The separability property must be considered in the context of the desired decomposition. For example, in the analysis of a speech signal, an analysis window that is long relative to the time between glottal pulses is sufficient to separate harmonics, but the individual glottal pulses will be smeared, because many pulses are covered by each window (that is, the individual pulses are not separable, in time, by the chosen analysis window). An analysis window that is much shorter than the time between glottal pulses may resolve the glottal pulses, because no window spans more than one pulse, but the harmonic frequencies are smeared together, because the main lobe of the analysis window spectrum is wider than the spacing between the harmonics (that is, the harmonics are not separable, in frequency, by the chosen analysis window).

Extensions

Consensus complex reassignment

Gardner and Magnasco (2006) argues that the auditory nerves may use a form of the reassignment method to process sounds. These nerves are known for preserving timing (phase) information better than they do for magnitudes. The authors come up with a variation of reassignment with complex values (i.e. both phase and magnitude) and show that it produces sparse outputs like auditory nerves do. By running this reassignment with windows of different bandwidths (see discussion in the section above), a "consensus" that captures multiple kinds of signals is found, again like the auditory system. They argue that the algorithm is simple enough for neurons to implement.

Synchrosqueezing transform

References

Further reading

  • S. A. Fulop and K. Fitz, A spectrogram for the twenty-first century, Acoustics Today, vol. 2, no. 3, pp.26–33, 2006.

  • S. A. Fulop and K. Fitz, Algorithms for computing the time-corrected instantaneous frequency (reassigned) spectrogram, with applications, Journal of the Acoustical Society of America, vol. 119, pp.360 – 371, Jan 2006.