Wikipedia / Constitutive equation
Wikipedia / Constitutive equation
In physics and engineering, a constitutive equation or constitutive relation is a relation between two or more physical quantities (especially kinetic quantities as related to kinematic quantities) that is specific to a material or substance or field, and approximates its response to external stimuli, usually as applied fieldss or forces. They are combined with other equations governing physical laws to solve physical problems; for example in fluid mechanics the flow of a fluid in a pipe, in solid state physics the response of a crystal to an electric field, or in structural analysis, the connection between applied stresses or loads to strainss or deformationss.
Some constitutive equations are simply phenomenological; others are derived from first principles. A common approximate constitutive equation frequently is expressed as a simple proportionality using a parameter taken to be a property of the material, such as electrical conductivity or a spring constant. However, it is often necessary to account for the directional dependence of the material, and the scalar parameter is generalized to a tensor. Constitutive relations are also modified to account for the rate of response of materials and their non-linear behavior. See the article Linear response function.
Mechanical properties of matter
The first constitutive equation (constitutive law) was developed by Robert Hooke and is known as Hooke's law. It deals with the case of linear elastic materials. Following this discovery, this type of equation, often called a "stress-strain relation" in this example, but also called a "constitutive assumption" or an "equation of state" was commonly used. Walter Noll advanced the use of constitutive equations, clarifying their classification and the role of invariance requirements, constraints, and definitions of terms like "material", "isotropic", "aeolotropic", etc. The class of "constitutive relations" of the form stress rate = (velocity gradient, stress, density) was the subject of Walter Noll's dissertation in 1954 under Clifford Truesdell.
In modern condensed matter physics, the constitutive equation plays a major role. See Linear constitutive equations and Nonlinear correlation functions.
Definitions
Where:
is the component of the force applied to area (either parallel or perpendicular)
and are the dimension (length, volume)
, , and are the change in dimension due to the applied force
Deformation of solids
Friction
Friction is a complicated phenomenon. Macroscopically, the friction force at the interface of two materials can be modelled as proportional to the reaction force at a point of contact between two interfaces through a dimensionless coefficient of friction , which depends on the pair of materials:
This can be applied to static friction (friction preventing two stationary objects from slipping on their own), kinetic friction (friction between two objects scraping/sliding past each other), or rolling friction (frictional force which prevents slipping but causes a torque to exert on a round object).
Stress and strain
The stress-strain constitutive relation for linear materials is commonly known as Hooke's law. In its simplest form, the law defines the spring constant (or elasticity constant) in a scalar equation, stating the tensile/compressive force is proportional to the extended (or contracted) displacement :
meaning the material responds linearly. Equivalently, in terms of the stress , Young's modulus , and strain (dimensionless):
In general, forces which deform solids can be normal to a surface of the material (normal forces), or tangential (shear forces), this can be described mathematically using the stress tensor:
where is the elasticity tensor and is the compliance tensor.
Solid-state deformation
Several classes of deformation in elastic materials are the following:
Plastic: The applied force induces non-recoverable deformation in the material when the stress (or elastic strain) reaches a critical magnitude, called the yield point.
Elastic: The material recovers its initial shape after deformation.
Viscoelastic: If the time-dependent resistive contributions are large, and cannot be neglected. Rubbers and plastics have this property, and certainly do not satisfy Hooke's law. In fact, elastic hysteresis occurs.
Anelastic: If the material is close to elastic, but the applied force induces additional time-dependent resistive forces (i.e. depend on rate of change of extension/compression, in addition to the extension/compression). Metals and ceramics have this characteristic, but it is usually negligible, although not so much when heating due to friction occurs (such as vibrations or shear stresses in machines).
Hyperelastic: The applied force induces displacements in the material following a strain energy density function.
Collisions
The relative speed of separation of an object A after a collision with another object B is related to the relative speed of approach by the coefficient of restitution, defined by Newton's experimental impact law:
which depends on the materials A and B are made from, since the collision involves interactions at the surfaces of A and B. Usually , in which for completely elastic collisions, and for completely inelastic collisions. It is possible for to occur – for superelastic (or explosive) collisions.
Deformation of fluids
The drag equation gives the drag force on an object of cross-section area moving through a fluid of density at velocity (relative to the fluid)
where the drag coefficient (dimensionless) depends on the geometry of the object and the drag forces at the interface between the fluid and object.
For a Newtonian fluid of viscosity , the shear stress is linearly related to the strain rate (transverse flow velocity gradient) (unitss−1). In a uniform shear flow:
with the variation of the flow velocity in the cross-flow (transverse) direction . In general, for a Newtonian fluid, the relationship between the elements of the shear stress tensor and the deformation of the fluid is given by
where:
is the Kronecker delta;
is the volumetric strain
where are the components of the flow velocity vector in the corresponding coordinate directions.
The ideal gas law is a constitutive relation in the sense the pressure and volume are related to the temperature , via the number of moles of gas:
where is the gas constant (J⋅K−1⋅mol−1).
Electromagnetism
Constitutive equations in electromagnetism and related areas
In both classical and quantum physics, the precise dynamics of a system form a set of coupled differential equations, which are almost always too complicated to be solved exactly, even at the level of statistical mechanics. In the context of electromagnetism, this remark applies to not only the dynamics of free charges and currents (which enter Maxwell's equations directly), but also the dynamics of bound charges and currents (which enter Maxwell's equations through the constitutive relations). As a result, various approximation schemes are typically used.
For example, in real materials, complex transport equations must be solved to determine the time and spatial response of charges, for example, the Boltzmann equation or the Fokker–Planck equation or the Navier–Stokes equations. For example, see magnetohydrodynamics, fluid dynamics, electrohydrodynamics, superconductivity, plasma modeling. An entire physical apparatus for dealing with these matters has developed. See for example, linear response theory, Green–Kubo relations and Green's function (many-body theory).
These complex theories provide detailed formulas for the constitutive relations describing the electrical response of various materials, such as permittivities, permeabilities, conductivities and so forth.
It is necessary to specify the relations between displacement field and , and the magnetic H-field and , before doing calculations in electromagnetism (i.e. applying Maxwell's macroscopic equations). These equations specify the response of bound charge and current to the applied fields and are called constitutive relations.
Determining the constitutive relationship between the auxiliary fields and and the and
where is the polarization field and is the magnetization field which are defined in terms of microscopic bound charges and bound current respectively. Before getting to how to calculate and it is useful to examine the following special cases.
Without magnetic or dielectric materials
In the absence of magnetic or dielectric materials, the constitutive relations are simple:
where and are two universal constants, called the permittivity of free space and permeability of free space, respectively.
Isotropic linear materials
In an (isotropic) linear material, where is proportional to , and is proportional to , the constitutive relations are also straightforward. In terms of the polarization and the magnetization they are:
where and are the electric and magnetic susceptibilities of a given material respectively. In terms of and the constitutive relations are:
where and are constants (which depend on the material), called the permittivity and permeability, respectively, of the material. These are related to the susceptibilities by:
General case
For real-world materials, the constitutive relations are not linear, except approximately. Calculating the constitutive relations from first principles involves determining how and are created from a given and . These relations may be empirical (based directly upon measurements), or theoretical (based upon statistical mechanics, transport theory or other tools of condensed matter physics). The detail employed may be macroscopic or microscopic, depending upon the level necessary to the problem under scrutiny.
but and are not, in general, simple constants, but rather functions of , , position and time, and tensorial in nature. Examples are:
As a variation of these examples, in general materials are bianisotropic where and depend on both and , through the additional coupling constants and :
In practice, some materials properties have a negligible impact in particular circumstances, permitting neglect of small effects. For example: optical nonlinearities can be neglected for low field strengths; material dispersion is unimportant when frequency is limited to a narrow bandwidth; material absorption can be neglected for wavelengths for which a material is transparent; and metals with finite conductivity often are approximated at microwave or longer wavelengths as perfect metals with infinite conductivity (forming hard barriers with zero skin depth of field penetration).
Some man-made materials such as metamaterials and photonic crystals are designed to have customized permittivity and permeability.
Calculation of constitutive relations
The theoretical calculation of a material's constitutive equations is a common, important, and sometimes difficult task in theoretical condensed-matter physics and materials science. In general, the constitutive equations are theoretically determined by calculating how a molecule responds to the local fields through the Lorentz force. Other forces may need to be modeled as well such as lattice vibrations in crystals or bond forces. Including all of the forces leads to changes in the molecule which are used to calculate and as a function of the local fields.
The local fields differ from the applied fields due to the fields produced by the polarization and magnetization of nearby material; an effect which also needs to be modeled. Further, real materials are not continuous media; the local fields of real materials vary wildly on the atomic scale. The fields need to be averaged over a suitable volume to form a continuum approximation.
These continuum approximations often require some type of quantum mechanical analysis such as quantum field theory as applied to condensed matter physics. See, for example, density functional theory, Green–Kubo relations and Green's function.
A different set of homogenization methods (evolving from a tradition in treating materials such as conglomerates and laminates) are based upon approximation of an inhomogeneous material by a homogeneous effective medium (valid for excitations with wavelengths much larger than the scale of the inhomogeneity).
The theoretical modeling of the continuum-approximation properties of many real materials often rely upon experimental measurement as well. For example, of an insulator at low frequencies can be measured by making it into a parallel-plate capacitor, and at optical-light frequencies is often measured by ellipsometry.
Thermoelectric and electromagnetic properties of matter
These constitutive equations are often used in crystallography, a field of solid-state physics.
Photonics
Refractive indexRefractive index
The (absolute) refractive index of a medium (dimensionless) is an inherently important property of geometric and physical optics defined as the ratio of the luminal speed in vacuum to that in the medium :
where is the permittivity and the relative permittivity of the medium, likewise is the permeability and are the relative permeability of the medium. The vacuum permittivity is and vacuum permeability is . In general, (also ) are complex numbers.
The relative refractive index is defined as the ratio of the two refractive indices. Absolute is for one material, relative applies to every possible pair of interfaces;
Speed of lightSpeed of light in matter
As a consequence of the definition, the speed of light in matter is
for special case of vacuum; and ,
Piezooptic effect
The piezooptic effect relates the stresses in solids to the dielectric impermeability , which are coupled by a fourth-rank tensor called the piezooptic coefficient (unitsK−1):
Transport phenomena
Definitions
Definitive laws
There are several laws which describe the transport of matter, or properties of it, in an almost identical way. In every case, in words they read:
Flux (density) is proportional to a gradient, the constant of proportionality is the characteristic of the material.
In general the constant must be replaced by a 2nd rank tensor, to account for directional dependences of the material.
See also
Notes
References